Wireless CPE Router

Outdoor Unit
The Customer Premises Equipment (CPE) Router is a suitable solution for Wireless network developments, which combine the most high tech computer circuits with it's SmartCell Brain, the software that controls the CPE unit as an Access Point (AP mode) or as a CPE Client (Infrastructure mode) unit. In addition it acts as a router between the user and his Internet Service Provider. 

It is also ideal to build Repeaters in combination of two CPE Routers, or one CPE Router and one Access Point. The link to the back haul is provided by the PCMCIA card, which can be the Teletronics 2 Mbit or 11 Mbit card. The forward link or the local loop is provided by an Access Point connected to the Ethernet port.

CPE Board Specifications :

Processor : AMD 100 MHz

Memory : 16 MB SDRAM.

Compact Flash Card : 16 MB Compact Flash Card.

Operating System : Linux 2.4.13 Kernel. 

Web Management : Configuration, monitoring, information.

PCMCIA Slot : Single PCMCIA card bus controller

Ethernet Adapter : Realtek 8139C or NSC DP83815 10/100 HD.

Serial Port : 9 Pins, RS-232.

RF Connector : N-Female. 

Power Consumption : Board: 75mA ; Board + PCMCIA: 175mA.  

Safety Voltage Range : First Generation: 12 VDC ~ 24 VDC

Second Generation : 12 VDC ~ 48 VDC  

AC Adaptor : Input 120 VAC -- 60 Hz -- 250 mA, Output 18 VDC -- 1000 mA

DC Injector : Combine Power and Data Through a RJ-45 Cable

Cables : 3' Straight RJ-45 (Blue) , 1' Cross Over RJ-45 (Gray)

RF Adapter Cable type N (Male or Female)

Dimensions :  8.5" L x 11.25" W x 3" H

(216 mm L x 286 mm W x 76 mm H)

Weight: 7 lb (Box, Board, Adapter Cable, AC Adaptor, DC-Injector, RJ45).

Operating Temperature: 0 ~ 60 ° C (32 ~ 140 ° F)

Humidity (non condensing): 5 ~ 80 %

LED Indicators :

LED position image

(For Second Generation Only)

Firmware V. 2.21.2, 2.21.2, 2.52.1 & 2.52.2 Firmware V. 2.21.3, 2.52.3, 3.02.4 or Higher

RED: Error

ON = OK

OFF = Error

Blink = Firmware Upgrading

 RED: Error

OFF = OK

ON Fixed = Bios Error

On Blink = Firmware louding or Upgrading

Firmware V. 2.2x ; 3.02.x or Higher

Green 1 : Power

ON = OK

OFF = No power

Firmware V. 2.2x ; 3.02.x or Higher

Green 2: LAN

ON = Link

Blink = Data

OFF = No Link

Firmware V. 2.6x ; 3.02.5 or Higher

Jumper LED: Wireless Link (Optional - Max. 6 mA)

ON = Link

Blink = No Link

OFF = Option not available